Seven-piece outdoor dining set: aluminium PSPC board table with six rope weave chairs
A complete outdoor dining group of seven pieces: one FHTB084 dining table with a light grey PSPC board top on X-shaped supports, and six FHCH059 chairs with rope weave backs, wood-topped armrests and taut sling seats.
The set is specified for hotel terraces, restaurant gardens, villa courtyards and poolside decks. The chairs are offered in six builds, so one quotation can hold the same table with the chair that suits the site, and the whole group is quoted as a seven-piece set.
The seven-piece set as supplied: one table and six chairs.
Specification at a glance
Set composition
Seven pieces: one FHTB084 dining table and six FHCH059 chairs
Table top
Light grey PSPC board with fine parallel stripes running along the length
Table base
X-shaped crossed supports at both ends in flat rectangular section, with a horizontal beam under the top
Table finish
Light grey matt finish on the top and the base
Chair frame
Light grey-beige square tube aluminium frame, four upright legs with dark foot pads
Chair armrest
Horizontal armrest with a light wood panel on top, running the full length
Chair back
Open aluminium frame with closely spaced light grey rope weave between the rails
Chair seat
Flat taut grey fabric, sling style; the chair has no loose padded seat
Chair builds
Six options: rope weave or textilene back, stacked or knock-down packing
What is in the set
Seven pieces are supplied together: one table and six chairs. The images on this page show exactly those seven pieces.
One dining table
FHTB084, 210 x 97 cm, with a light grey PSPC board top on two X-shaped crossed supports.
Six dining chairs
FHCH059, W56 x D65 x H87 cm, supplied six to the set in the chair build you select.
How the set is built
Every part is checked against the production sample before it is drawn, so the top, the base and the chair are ordered exactly as they are built.
Part
Construction
Table top
PSPC board with fine parallel stripes along the length, thin flat edge and small rounded corners
Table base
One X-shaped crossed support at each end, with flat rectangular section members splaying to the floor
Underframe
One horizontal beam runs between the two X-shaped supports, under the table top
Chair frame
Square tube aluminium frame, four upright legs with dark foot pads and a side rail on each side
Chair armrest
Horizontal armrest with a light wood panel on top, the only warm-toned element in the group
Chair back and seat
Open frame with closely spaced rope weave, and a flat taut fabric seat with no loose padded seat
Why Foris Hortus
Complete seating group
Table and six chairs quoted together, so a terrace is fitted from one order line.
Six chair builds
Rope weave or textilene backs, stacked or knock-down packing, on one table.
OEM and ODM
Custom size, colour and logo for hotel, restaurant and villa projects.
Export packing
Table 0.323 CBM per carton, 165 tables per 40'HQ; chairs 1058 to 1220 per 40'HQ by build.
Sizes
Table
210 x 97 cm
Chair
W56 x D65 x H87 cm (chair build C1 is listed at W59.5 x D67 x H87 cm)
Set options and pricing
The table is the same in every option; the six lines below differ by chair build, and each price is for the complete seven-piece set.
Set code
Chair build
Price per seven-piece set
FHTB084 + 6 x FHCH059-B2
Textilene back, stacked
Quotation on request
FHTB084 + 6 x FHCH059-C1
Rope weave back, stacked
Quotation on request
FHTB084 + 6 x FHCH059-B1
Rope weave back, stacked
Quotation on request
FHTB084 + 6 x FHCH059-B4
Rope weave back, knock-down
Quotation on request
FHTB084 + 6 x FHCH059-B3
Rope weave back, knock-down
Quotation on request
FHTB084 + 6 x FHCH059-A1
Rope weave back, stacked
Quotation on request
Tell us the terrace layout, the seating capacity you are working to and the finish, and the reply confirms the chair build, the packing plan and the delivered price for the set.
Packing and loading
Item
Carton
Volume
Per 40'HQ
Dining table
216 x 14.5 x 103 cm, one table per carton
0.323 CBM
165 tables
Chair, knock-down (B3)
65 x 55 x 36 cm
0.1287 CBM
1058 chairs
Chair, knock-down and stacked (B4, C1)
65 x 55 x 62 cm
0.22165 CBM
1220 chairs
Chair, stacked (A1, B1, B2)
Stacked frames, 25 per stack in the stacking rack
On the packing plan
1200 chairs
Tables and chairs ship on separate cartons, so a project can be split between sites or stored in stages without unpacking the whole group.
Where this set is specified
Villa courtyards
A complete dining group for six, from one order line.
Hotel terraces
Runs of identical groups that keep one chair specification across a site.
Restaurant gardens
A table and six chairs that can be moved and stored as a group between seasons.
Poolside decks
Aluminium frames and rope weave for decks that are washed down between seasons.
Ordering and customisation
Set contents
One FHTB084 table and six FHCH059 chairs
Chair build
Six options; the same table is used in every one
Customisation
OEM and ODM: custom size, colour and logo
HS codes
9403899000 (outdoor table) and 9401719000 (outdoor chair)
Documentation
Specification sheet, carton sizes and loading plan for the set
Drawings and documentation
Specification sheet
The specification sheet for the set and the chair build you select is supplied with the quotation.
Carton and loading plan
Carton sizes, carton counts and the loading plan for the table and the chairs, so freight is quoted against a set count.
Layout confirmation
Send a terrace plan or photographs of the space and the layout for six seats is confirmed before the order is placed.
Care and maintenance
The table top
Wipe the PSPC board with fresh water and a soft cloth; use mats under hot dishes and avoid abrasive pads.
Frame and base
Clean the aluminium frame and the X-shaped base with fresh water; the light grey matt finish needs no polish.
Rope weave and sling seat
Brush the rope weave and the taut fabric seat after use and let them dry in the air before the chairs go back to the table.
Off season
Stack the chairs on the stacking rack and store the set dry when the terrace is out of use for the season.
Common questions
How many pieces are in the set?
Seven: one dining table and six chairs. The images on this page show those seven pieces and nothing else.
What is the table top made of?
A light grey PSPC board with fine parallel stripes running along the length, on X-shaped crossed supports in the same finish.
Are the chairs supplied with seat pads?
No. The chair has a flat taut grey fabric seat in a sling style, with a rope weave back between the frame rails.
What are the sizes?
The table is 210 x 97 cm and the chair is W56 x D65 x H87 cm.
How are the table and chairs packed?
The table is packed one to a carton of 216 x 14.5 x 103 cm, 0.323 CBM, at 165 per 40'HQ. The chairs are packed by build: 65 x 55 x 36 cm or 65 x 55 x 62 cm, or stacked 25 to a rack, loading 1058 to 1220 per 40'HQ.
What should I send for a quotation?
Your project, the terrace layout, the seating capacity and the finish you are working to. We reply with the chair build, the packing plan and the price per seven-piece set.
Planning an outdoor dining project?
Send us the layout, the seating capacity and the finish you are working to, and we will come back with the chair build and the delivered price for the set.
Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.
Level AEssential
Volume orders and straightforward commercial layouts.
Standard aluminium frame, standard canopy fabric, fixed position.
Level BStandard
The usual specification for hotel and restaurant terraces.
Upgraded frame section and fabric weight, added adjustment or opening system.
Level CPremium
Flagship hospitality projects where the terrace is photographed.
Marine-grade hardware, higher-specification fabric, LED or rotation as standard.
Level DProjectYour specification
Multi-scheme developments specified to a full site brief.
Bespoke dimensions, matched base and furniture, project documentation and QC.
Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.
At a glance
CategoryCommercial Outdoor Furniture
Sizes
MaterialPowder-coated aluminium
Best usedHotels, resorts, restaurants, clubs
Features
Powder-coated aluminium
Frames and tabletops are powder-coated for colour fastness and easy cleaning in coastal and poolside settings.
Outdoor-grade seating
Slat, rope-weave and quick-dry foam constructions are selected for outdoor service life rather than indoor comfort alone.
Stackable and movable
Bistro and lounge pieces stack or split into two so a terrace can be reconfigured for service and storage.
Contract-friendly dimensions
Seat heights, table sizes and arm positions follow hospitality standards used across the terrace.
Options & customisation
Cushion and sling colour cards
Table and chair size schedules for terrace layouts
Covers, storage and spare cushion sets
Weighted bases and anchoring for open sites
OEM branding and custom colour matching
12-month warrantyCovered from the date of loading, with third-party inspection supported
OEM / ODM productionCustom sizes, finishes and printed branding for project schemes
Marine-grade materialsTested for high UV, humidity and coastal wind
FOB NingboL/C and T/T terms, quotation within one working day
Need Samples or Detailed Specifications?
Request a material sample and the full size and fabric schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.
