White round tube aluminium garden armchair with speckled cushions
An outdoor dining armchair on a white round tube aluminium frame: each side is formed by one continuous tube that runs up as the back post, turns forward as the armrest and bends down again as the front leg.
The armchair carries a thick fixed seat cushion and a large back cushion that rests on the low back frame in a pale grey speckled fabric, and it is specified for hotel terraces, restaurant gardens, villa patios and poolside decks. It is packed three chairs to a carton at 0.367 CBM, with 576 chairs loading into a 40'HQ container.
The armchair specified for terraces, courtyards and restaurant gardens.
Restaurant gardens
Specification at a glance
Frame
White round tube aluminium; no square tube, no flat panels, no timber parts
Frame construction
One continuous tube per side: back post up from the floor, turn forward as the armrest, bend down as the front leg
Armrest
Round tube sloping gently down from the back joint to the front bend
Legs
Four near-vertical round tube legs with foot pads; no cross rail, no stretcher and no lower shelf under the seat
Back
Low open frame of two back posts and a horizontal top rail, with no infill panel
Seat front rail
One horizontal round tube joining the two sides under the seat cushion
Cushions
Thick fixed seat cushion with a rounded front edge, plus a large back cushion that rests on the low back frame
Cushion fabric
Pale grey speckled fabric, simple edge seams, no buttons and no quilting
Carton
58 x 68 x 93 cm, three chairs per carton
Volume per carton
0.367 CBM
Gross / net weight
17 kg / 15 kg
Loading
576 chairs per 40'HQ
HS Code
9401790000 (outdoor chair)
How the chair is made
Every part is checked against the production sample before it is drawn, so the frame, the cushions and the base are ordered exactly as they are built.
Part
Construction
Side frame
One continuous white round tube: back post, armrest and front leg in a single run
Armrest
Runs nearly level from the back joint to the front bend, rising only slightly at the back joint
Legs
Four near-vertical round tubes with small foot pads; the space under the seat stays open
Back
Two back posts and a horizontal top rail form a low open frame; the low open frame carries a large back cushion
Seat platform
One horizontal side rail runs along each side at seat frame level and links the front and rear legs; there is no cross rail under the seat
Seat and back cushions
A thick fixed seat cushion with a rounded front edge, and a large back cushion that rests on the low back frame resting against the frame
Armrests, cushions and legs
Armrest and frame
The armrest is the same round tube as the back post and the front leg, running nearly level towards the front bend.
Cushions
A thick seat cushion with a rounded front edge and a large back cushion that rests on the low back frame, both in the same speckled fabric.
Legs and underframe
Four near-vertical round tube legs with foot pads; the space under the seat is left open.
Why Foris Hortus
Round tube frame
A white round tube aluminium frame, light to move when a terrace is rearranged.
Back cushion
The back cushion sits inside the back frame and lifts out for cleaning, so a terrace can be reset quickly between sittings.
OEM and ODM
Custom size, colour and logo for hotel, restaurant and villa projects.
Export packing
Three chairs to a carton at 0.367 CBM, 576 chairs to a 40'HQ container.
Where this chair is specified
Villa courtyards
Dining chairs that can be moved between the table and the terrace as the day changes.
Hotel terraces
Loose seating that stores compactly between seasons on the same frame family.
Restaurant gardens
Runs of identical chairs that keep one cushion specification across a site.
Poolside decks
Aluminium frames and speckled cushions for decks that are washed down between seasons.
Price
per chair
Code
Item
Packing
Price
FHCH078-A1
White round tube aluminium garden armchair
Three chairs per carton
Quotation on request
Send the layout you are working to and the quantity, and the reply confirms the finish, the packing plan and the delivered price.
Packing and loading
Carton size
58 x 68 x 93 cm
Chairs per carton
Three
Volume per carton
0.367 CBM
Gross / net weight
17 kg / 15 kg
Container loading
576 chairs per 40'HQ
Because three chairs share one carton, a terrace can be planned from a carton count rather than from individual chairs, which keeps storage and freight simple.
Ordering and customisation
Code
FHCH078-A1
Packing
Three chairs per carton, 0.367 CBM
Customisation
OEM and ODM: custom size, colour and logo
HS code
9401790000 (outdoor chair)
Quantity terms
Order quantity and packing plan confirmed with the quotation
Drawings and documentation
Specification sheet
The specification sheet for the chair is supplied with the quotation.
Carton and loading plan
Carton size, carton count and the loading plan for the order, so freight is quoted against a chair count.
Layout confirmation
Send a terrace plan or photographs of the space and the seating layout is confirmed before the order is placed.
Common questions
What is the frame made of?
White round tube aluminium, with no square tube and no timber parts. Each side is one continuous tube that forms the back post, the armrest and the front leg.
How does the armrest run?
The armrest follows the same tube as the back post and the front leg, so it runs nearly level from the back joint to the front bend.
Are the cushions included?
Yes. The chair comes with a thick fixed seat cushion and a large back cushion that rests on the low back frame, both in a pale grey speckled fabric.
Is anything fitted under the seat?
No. The space under the seat is left open: four near-vertical legs and one horizontal front rail, with no cross rails or lower shelf.
How is the chair packed?
Three chairs to a carton of 58 x 68 x 93 cm, 0.367 CBM, 17 kg gross and 15 kg net; 576 chairs load into a 40'HQ container.
What should I send for a quotation?
Your project, the layout, the finish you are working to and the quantity. We reply with the specification and the price per chair.
Specifying seating for an outdoor project?
Send us the layout, the finish you are working to and the quantity, and we will come back with the specification and the delivered price.
This model is built as a white aluminium round tube garden armchair for hotel terraces, resort pool decks and restaurant gardens, with custom sizes, finishes and logo branding available on project orders. It also answers the brief for a stackable outdoor dining chair for hotels.
At a glance
CategoryOutdoor Dining Chair
Sizes
MaterialPowder-coated aluminium
Best usedHotels, resorts, restaurants, clubs
Features
Powder-coated aluminium
Frames and tabletops are powder-coated for colour fastness and easy cleaning in coastal and poolside settings.
Outdoor-grade seating
Slat, rope-weave and quick-dry foam constructions are selected for outdoor service life rather than indoor comfort alone.
Stackable and movable
Bistro and lounge pieces stack or split into two so a terrace can be reconfigured for service and storage.
Contract-friendly dimensions
Seat heights, table sizes and arm positions follow hospitality standards used across the terrace.
Options & customisation
Cushion and sling colour cards
Table and chair size schedules for terrace layouts
Covers, storage and spare cushion sets
Weighted bases and anchoring for open sites
OEM branding and custom colour matching
12-month warrantyCovered from the date of loading, with third-party inspection supported
OEM / ODM productionCustom sizes, finishes and printed branding for project schemes
Marine-grade materialsTested for high UV, humidity and coastal wind
FOB NingboL/C and T/T terms, quotation within one working day
Need Samples or Detailed Specifications?
Request a material sample and the full size and fabric schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.
Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.
Level AEssentialYour specification
Volume orders and straightforward commercial layouts.
Standard aluminium frame, standard canopy fabric, fixed position.
Level BStandard
The usual specification for hotel and restaurant terraces.
Upgraded frame section and fabric weight, added adjustment or opening system.
Level CPremium
Flagship hospitality projects where the terrace is photographed.
Marine-grade hardware, higher-specification fabric, LED or rotation as standard.
Level DProject
Multi-scheme developments specified to a full site brief.
Bespoke dimensions, matched base and furniture, project documentation and QC.
Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.
Hotel terraces
Restaurant gardens
Poolside decks
