Crafted Technology, Customized Outdoor Aesthetics

Elevate Garden Living

Home / All / Outdoor Umbrellas / Umbrella Base / side pole umbrella base / 360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas

360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas

360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas
360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas
Share
Categoriesside pole umbrella base
BrandForis Hortus
Product SpecificationsCantilever Base Series
Product TypeHeavy-Duty Marble Umbrella Base
Suitable ForCommercial Large Cantilever Umbrella
Total Weight~360 kg
Base Dimensions145 × 120 × 20 cm
Marble Slab Size46 × 46 × 5 cm
Marble Quantity10 Pieces
Marble Weight Per Piece~28 kg
Total Marble Weight~280 kg
FrameWelded Steel Frame
MaterialsMarble Slab + Welded Steel
Color OptionsBlack / White
InstallationModular marble assembly + central pole fixing
Recommended ForHotels, Resorts, Poolside Lounges, Beach Clubs, Restaurants, Luxury Villas
Specification LevelLevel C · Premium — Premium specification for flagship hospitality projects.
FOB portNingbo
Terms of PaymentL/C, D/A, D/P, Western Union
Detail Information

360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas

A commercial-grade counterweight engineered for large cantilever umbrellas. Combines a welded steel frame with 10 marble slabs to deliver 360 kg of stable support for luxury hotels, resorts, poolside lounges, and beach clubs.

Request a Quote
360KG welded marble cantilever umbrella base displayed beside a large cantilever parasol at a coastal resort

Engineered for Stability and Style

Built to resist canopy leverage and wind loads while adding a premium visual finish to high-end outdoor spaces.

360KG Total Weight

Ten marble slabs plus a welded steel frame create a heavy-duty foundation that keeps large cantilever umbrellas upright.

Modular Marble Layout

Each 46×46×5 cm slab weighs ~28 kg for easier transport and on-site assembly compared to a single solid base.

Welded Steel Frame

Reinforced welded steel chassis distributes load evenly and withstands years of commercial outdoor use.

Welded Steel Frame Built for Heavy Loads

Welded steel frame holding the marble slab core of the 360KG cantilever umbrella base

Integrated Welded Chassis

Steel frame is fully welded into a rigid platform that resists flex under cantilever leverage.

Central Pole Socket

Engineered socket and fixing structure for secure connection to large side-pole umbrella masts.

Leveling Feet

Adjustable feet keep the base stable on uneven terrace or pool deck surfaces.

Black or White Finish

Powder-coated steel frame available in black or white to match surrounding furniture and architecture.

A Stable Foundation for Premium Outdoor Shade

A Stable Foundation for Premium Outdoor Shade

The 145×120×20 cm footprint spreads the load over a wide area, while the low-profile design keeps sightlines clean around lounge seating, dining sets, and pool decks.

Get Project Pricing

Premium Marble Slab Construction

Ten natural marble slabs provide the mass and visual weight that luxury hospitality projects expect. The stone finish complements contemporary terraces, resort pools, and villa gardens.

  • 46 × 46 × 5 cm per slab (~28 kg)
  • Natural stone density for maximum ballast
  • Modular arrangement for flexible installation
  • Elegant finish that suits premium settings
Natural marble slabs stacked as the ballast core of the 360KG welded base

Technical Specifications

AttributeSpecification
Product TypeHeavy-Duty Marble Umbrella Base
Suitable ForCommercial Large Cantilever Umbrella
Total Weight~360 kg
Base Dimensions145 × 120 × 20 cm
Marble Slab Size46 × 46 × 5 cm
Marble Quantity10 Pieces
Marble Weight Per Piece~28 kg
Total Marble Weight~280 kg
FrameWelded Steel Frame
MaterialsMarble Slab + Welded Steel
Color OptionsBlack / White
InstallationModular marble assembly + central pole fixing
Recommended ForHotels, Resorts, Poolside Lounges, Beach Clubs, Restaurants, Luxury Villas

Designed for Premium Commercial Outdoor Spaces

Luxury Hotels
Resort Pool Decks
Beach Clubs & Restaurants
Premium Villas

Need a Custom Base Configuration?

Foris Hortus supports OEM/ODM finishes, branding, and packaging for hospitality projects. Contact us for CAD support, samples, and project pricing.

Send Inquiry / Get Quote

Frequently Asked Questions

The questions buyers ask most often about this cantilever base. Tap a question to read the answer.

What are the main specifications?

This base is specified as Product Type Heavy-Duty Marble Umbrella Base; Suitable For Commercial Large Cantilever Umbrella; Total Weight ~360 kg; Base Dimensions 145 × 120 × 20 cm; Marble Slab Size 46 × 46 × 5 cm; Marble Quantity 10 Pieces. All dimensions and finishes can be adjusted for the project, and the full size range is available on request.

Which cantilever umbrellas is this base made for?

It is engineered for cantilever and side-pole umbrellas, where the whole canopy sits to one side and behaves like a sail in wind. Always match the base weight to the canopy size listed in the umbrella data.

How much weight does a cantilever base need?

Cantilever umbrellas need noticeably more ballast than center-pole models, commonly between 160 kg and 360 kg depending on canopy size and whether the site is exposed. The size table in each umbrella listing shows the minimum recommended base weight.

Water fill, sand fill or solid weight?

Water-filled HDPE tanks install fast and can be drained for storage; sand adds about 50 percent more weight in the same volume and does not freeze solid; welded steel, granite or concrete-filled bases give the highest stability with no moving parts.

Does it work on a deck, patio or soft ground?

On hard surfaces place the base on a protective pad and check that it sits fully supported; this 360KG base is a single welded marble unit, so set it on a protective pad on hard ground and confirm it sits fully supported. For lawn or soft ground, place it on a concrete pad or use in-ground sleeves rated for the load.

How is it assembled and moved?

The 360KG base is a welded steel frame holding ten marble slabs as one rigid unit. It is a heavy single piece, so move it with handling equipment or several people rather than a two-person carry; on-site work is limited to positioning and securing the frame — no welding or bolting required.

How do I maintain it?

Rinse off salt and dirt near the coast and inspect the welded joints and protective pads at the start of each season. The marble and powder-coated steel need no special upkeep.

Looking for the umbrella itself? Browse the cantilever umbrella range or match the base to an existing pole.

At a glance

CategorySide Pole Umbrella Base
WeightResin, concrete or water-filled
Pole fit38–80 mm
MaterialPowder-coated steel / resin

Features

Weighted stability

A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds.

Marine-grade finish

Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity.

Drainage and service access

Fill caps and drain points let a base be topped up or emptied between seasons without tools.

Matched to the frame

Weight, footprint and fixing method are confirmed against the canopy size and the local surface.

Options & customisation

  • Resin, concrete, steel-plated and water-filled options
  • In-ground anchoring for permanent terrace installation
  • Matching cover and spare fill caps
  • Base sizes matched to 38 mm, 48 mm and 80 mm poles
  • OEM colour matching for branded terraces
12-month warrantyCovered from the date of loading, with third-party inspection supported
OEM / ODM productionCustom moulding and colours for repeat project orders
Marine-grade materialsTested for high UV, humidity and coastal wind
FOB NingboL/C and T/T terms, quotation within one working day

Need Samples or Detailed Specifications?

Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.

Configuration Level

Four Specification Tiers, One Build Standard

Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.

Level AEssential

Volume orders and straightforward commercial layouts.

Standard aluminium frame, standard canopy fabric, fixed position.

Level BStandard

The usual specification for hotel and restaurant terraces.

Upgraded frame section and fabric weight, added adjustment or opening system.

Level CPremiumYour specification

Flagship hospitality projects where the terrace is photographed.

Marine-grade hardware, higher-specification fabric, LED or rotation as standard.

Level DProject

Multi-scheme developments specified to a full site brief.

Bespoke dimensions, matched base and furniture, project documentation and QC.

Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.

Review
  • 加载中···
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Elevate Garden Living

Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.