Crafted Technology, Customized Outdoor Aesthetics

Elevate Garden Living

Home / All / Outdoor Umbrellas / Umbrella Base / side pole umbrella base / Heavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacity

Heavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacity

Heavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacity
Heavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacityHeavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacityHeavy-Duty 180L HDPE Water-Filled Cantilever Umbrella Base | HDPE umbrella stand large capacity
Share
Categoriesside pole umbrella base
BrandForis Hortus
Product SpecificationsCantilever Base Series
ColorBlack
Product Size97*97*19cm
MaterialHDPE
After Filled Water180kgs water or 250kgs sand
Size of umbrella poleroman umbrellas Only one side with 4 wheels
Specification LevelLevel C · Premium — Premium specification for flagship hospitality projects.
Unit PriceUS $ 43.8-44.6 / piece
Terms of PaymentL/C, D/A, D/P, Western Union
Detail Information
Cantilever parasol on a lakeside terrace standing on a filled base with wheels
Base Series

Heavy Duty 180L HDPE Water-Filled Cantilever Umbrella Base

A cantilever-specific base with wheels on one side, so a side-pole parasol can be moved by one person. Filled to 180kg with water or 250kg with sand.

  • 180L capacity, 180kg filled with water
  • 250kg filled with sand
  • Wheels on one side for one-person moving
  • Built for cantilever and Roman umbrellas
Key Features

Six reasons buyers spec this base

A cantilever base has to carry more weight and still be movable. These are the decisions that make both true.

180L Capacity

A large capacity means a single base can reach 180kg with water or 250kg with sand, which is what a side-pole canopy actually needs.

Cantilever and Roman Fit

The socket and footprint are designed for side-pole cantilever umbrellas, where the load sits offset from the base centre.

Wheels on One Side

Casters on a single side let one person tilt and roll the base, instead of needing a team to shift it.

Offset Load Support

The wide 97cm footprint spreads an offset canopy load without the tipping that a narrow round base suffers.

UV-Stable HDPE

The polyethylene body is UV-stable and weatherproof, holding its shape and colour through seasons of outdoor use.

Commercial-Grade Build

Specified for high-traffic hospitality sites where the base is moved daily and still has to look presentable the next morning.

Detail of the HDPE base sections joined together showing the connection and castor fixing point
Movement Detail

One Person Can Still Move It

The wheels are fitted to one side only. That is deliberate: the base is tilted onto its castors, rolled across the terrace, then lowered back onto its full contact face so the load stays level.

  • Single-side castors for tilting and rolling
  • Lowers back to a full contact face when parked
  • 97 × 97 × 19cm footprint spreads offset load
  • Centre socket sized for cantilever umbrella poles
HDPE umbrella base detail showing the pole socket and structural moulding
Outdoor Reality

Where It Gets Used

This base is specified wherever a side-pole parasol is used on a terrace that still needs to be rearranged, which covers resort pool decks, hotel courtyards and waterfront restaurant dining.

  • Resort and hotel pool decks with cantilever umbrellas
  • Waterfront restaurant terraces
  • Hotel courtyards and event lawns
  • Rooftop and terrace dining with side-pole umbrellas
Specifications

Technical Specifications

One consistent specification set, with both fill weights stated clearly.

Product TypeHeavy Duty HDPE Cantilever Umbrella Base
MaterialHDPE polyethylene
ColourBlack
Product Size97 × 97 × 19cm
Capacity180L
Filled Weight180kg with water or 250kg with sand
Pole CompatibilityCantilever and Roman side-pole umbrellas, single-side wheel fitting
InstallationFill in place and move on castors, no tools required
Weather ResistanceUV-stable HDPE, outdoor all-season
ApplicationHotel, resort, restaurant, beach club
Specification LevelLevel C · Premium
Supply Partner

A Reliable Partner for Outdoor Hospitality

Foris Hortus supplies bases, umbrellas and outdoor furniture to hotels, resorts and F&B groups as one coordinated order.

Matched Hardware

Base and pole engineered to be specified together, so the socket fit is right the first time.

Brand Customization

Colour and finish options let the base match your property identity rather than sit against it.

Project Shipping

Consolidated packing and documented QC for cross-border hotel and resort orders.

After-Sales Support

Spare parts, care guidance and installation support for every commercial order.

Frequently Asked Questions

Common Questions About This Cantilever Umbrella Base

What is the difference between filling it with water or sand?

Water reaches about 180kg and fills fastest, which is enough for most standard setups. Sand reaches about 250kg and suits larger canopies or more exposed positions.

How does one person move a base this heavy?

The castors are fitted on one side only. Staff tilt the base onto the wheels, roll it across the terrace, then lower it back onto its full contact face so the load stays level.

Which umbrellas is this base designed for?

It is built for side-pole cantilever and Roman umbrellas, where the canopy load sits offset from the centre of the base and a narrow round base would tip.

Why is the footprint square rather than round?

A square 97cm footprint spreads an offset canopy load far better, which is what stops a cantilever umbrella lifting a corner of the base in wind.

Does it need to be emptied in winter?

Yes. Filled water expands when frozen, so the base should be emptied and dried before winter storage to avoid cracking and staining.

How is it maintained?

Wash with mild soap and water, drain after rain so the weight does not sit permanently, and inspect the plug and castor fittings at the start of each season.

Get a Quote for This Cantilever Umbrella Base

Tell us your quantity, umbrella size and destination port. We will reply with a tailored quotation within one business day.

At a glance

CategorySide Pole Umbrella Base
WeightResin, concrete or water-filled
Pole fit38–80 mm
MaterialHDPE

Features

Weighted stability

A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds.

Marine-grade finish

Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity.

Drainage and service access

Fill caps and drain points let a base be topped up or emptied between seasons without tools.

Matched to the frame

Weight, footprint and fixing method are confirmed against the canopy size and the local surface.

Options & customisation

  • Resin, concrete, steel-plated and water-filled options
  • In-ground anchoring for permanent terrace installation
  • Matching cover and spare fill caps
  • Base sizes matched to 38 mm, 48 mm and 80 mm poles
  • OEM colour matching for branded terraces
12-month warrantyCovered from the date of loading, with third-party inspection supported
OEM / ODM productionCustom moulding and colours for repeat project orders
Marine-grade materialsTested for high UV, humidity and coastal wind
FOB NingboL/C and T/T terms, quotation within one working day

Need Samples or Detailed Specifications?

Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.

Frequently Asked Questions

The questions buyers ask most often about this model. Tap a question to read the answer.

What are the main specifications?

This model is specified as Brand Foris Hortus; Fabric HDPE. All dimensions and finishes can be adjusted for the project, and the full size range is available on request.

What sizes and weights are available?

Resin, concrete, steel-plated and water-filled bases are produced, and the size is matched to the pole diameter and the canopy it carries.

How is it installed?

Bases are supplied as a separate item so the weight can be matched to the surface and to local wind exposure. Fixing method, anchoring and drainage are confirmed with the project specification.

What is the packaging and warranty?

Bases are shipped as a separate consignment from the umbrella frame and canopy. Outdoor furniture carries a 12-month warranty from the date of loading, with third-party inspection supported before shipment.

Configuration Level

Four Specification Tiers, One Build Standard

Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.

Level AEssential

Volume orders and straightforward commercial layouts.

Standard aluminium frame, standard canopy fabric, fixed position.

Level BStandard

The usual specification for hotel and restaurant terraces.

Upgraded frame section and fabric weight, added adjustment or opening system.

Level CPremiumYour specification

Flagship hospitality projects where the terrace is photographed.

Marine-grade hardware, higher-specification fabric, LED or rotation as standard.

Level DProject

Multi-scheme developments specified to a full site brief.

Bespoke dimensions, matched base and furniture, project documentation and QC.

Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.

Review
  • 加载中···
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Elevate Garden Living

Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.