Crafted Technology, Customized Outdoor Aesthetics

Elevate Garden Living

Home / All / Outdoor Umbrellas / Umbrella Base / side pole umbrella base / Heavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base support

Heavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base support

Heavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base support
Heavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base supportHeavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base supportHeavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base supportHeavy-Duty 60L HDPE Umbrella Base | 4-piece interlocking base support
Share
Categoriesside pole umbrella base
BrandForis Hortus
Product SpecificationsBase Series
ColorBlack
Product Size50*50*7.5cm
MaterialHDPE
After Filled Water60kgs water or 80kgs sand
Size of umbrella poleSuitable for all kinds of cross base
Specification LevelLevel B · Standard — Standard specification with upgraded frame and fabric.
Unit PriceUS $ 15-15.5 / piece
Terms of PaymentL/C, D/A, D/P, Western Union
Detail Information
Interlocking HDPE umbrella base supporting a parasol on a lakeside terrace
Base Series

Heavy Duty 60L HDPE Umbrella Base, 4-Piece Interlocking

A four-piece interlocking HDPE base that fills with water or sand to reach its working weight. Assembly takes minutes and the modular format means one person can carry a single section.

  • Four-piece interlocking format
  • Fills to 60kg with water or 80kg with sand
  • Light empty sections for handling
  • Suited to standard cross and cantilever bases
Key Features

Six reasons buyers spec this base

A fillable base trades setup effort for transport weight. These are the decisions that make it work on a real terrace.

Four-Piece Interlocking

Four sections lock together into one stable base, so a single piece is light enough for one person to carry from a store room.

Fill to 60kg with Water

Filled with water it reaches a 60kg working weight, enough for a standard 2.5m to 3m parasol on a sheltered terrace.

80kg with Sand

Filled with sand it reaches 80kg, giving extra stability for larger canopies or more exposed positions without changing the base.

Fits All Cross Bases

The socket geometry suits all standard cross bases, so it pairs with most commercial umbrella frames already in service.

Tool-Free Assembly

The sections interlock by hand and the pole clamps with a hand-tighten knob, so setup needs no tools and no specialist.

UV-Stable HDPE

The polyethylene body is UV-stable and weatherproof, holding its shape and colour through seasons of outdoor use.

Interlocking HDPE base sections joined together showing the connection detail
Assembly Detail

Four Parts, One Base, Minutes to Set

Each section locks into the next by hand and the pole drops into the centre socket. Assembly is quick enough to be done at the start of a service, and disassembly is just as fast at the end of the season.

  • Four sections lock together without tools
  • Each empty section is light enough for one person
  • Centre pole socket accepts standard commercial poles
  • Refill and reposition between service periods
Parasol on a lakeside terrace standing on a filled base beside the water
Outdoor Reality

Where It Gets Used

Fillable bases are chosen where the umbrella is moved often but the site still needs real weight, which covers most restaurant terraces, hotel courtyards and seasonal outdoor dining.

  • Restaurant and cafe terrace seating
  • Hotel courtyard and garden dining
  • Seasonal outdoor dining installations
  • Residential patios and balconies
Specifications

Technical Specifications

One consistent specification set, with the fill weight stated clearly.

Product TypeHeavy Duty HDPE Umbrella Base
MaterialHDPE polyethylene
ColourBlack
Product Size50 × 50 × 7.5cm
Filled Weight60kg with water or 80kg with sand
Pole CompatibilitySuits all standard cross bases
Format4-piece interlocking assembly
InstallationTool-free hand interlocking and pole clamp
Weather ResistanceUV-stable HDPE, outdoor all-season
ApplicationHotel, restaurant, cafe, residential patio
Specification LevelLevel B · Standard
Supply Partner

A Reliable Partner for Outdoor Hospitality

Foris Hortus supplies bases, umbrellas and outdoor furniture to hotels, resorts and F&B groups as one coordinated order.

Matched Hardware

Base and pole engineered to be specified together, so the socket fit is right the first time.

Brand Customization

Colour and finish options let the base match your property identity rather than sit against it.

Project Shipping

Consolidated packing and documented QC for cross-border hotel and resort orders.

After-Sales Support

Spare parts, care guidance and installation support for every commercial order.

Frequently Asked Questions

Common Questions About This HDPE Umbrella Base

How much does the base weigh when filled?

Filled with water it reaches about 60kg, and filled with sand about 80kg. Choose the fill that matches your canopy size and how exposed the position is.

How many people are needed to move it?

Empty, the four sections are light enough for one person to carry. Filled, it needs two people, or a dolly for shorter distances.

Which umbrella bases does it fit?

The socket geometry suits all standard cross bases, so it pairs with most commercial umbrella frames already in service without a new base being specified.

How long does assembly take?

The four sections interlock by hand and the pole clamps with a hand-tighten knob, so a base can be assembled in a few minutes with no tools and no specialist.

What happens to the water over winter?

The base should be emptied and dried before winter storage to avoid staining and frost damage, then refilled at the start of the season.

How is it maintained?

Wash with mild soap and water, drain after rain so the weight does not sit permanently, and inspect the fixings at the start of each season. Avoid abrasive cleaners on HDPE.

Get a Quote for This HDPE Umbrella Base

Tell us your quantity, umbrella size and destination port. We will reply with a tailored quotation within one business day.

At a glance

CategorySide Pole Umbrella Base
WeightResin, concrete or water-filled
Pole fit38–80 mm
MaterialHDPE

Features

Weighted stability

A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds.

Marine-grade finish

Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity.

Drainage and service access

Fill caps and drain points let a base be topped up or emptied between seasons without tools.

Matched to the frame

Weight, footprint and fixing method are confirmed against the canopy size and the local surface.

Options & customisation

  • Resin, concrete, steel-plated and water-filled options
  • In-ground anchoring for permanent terrace installation
  • Matching cover and spare fill caps
  • Base sizes matched to 38 mm, 48 mm and 80 mm poles
  • OEM colour matching for branded terraces
12-month warrantyCovered from the date of loading, with third-party inspection supported
OEM / ODM productionCustom moulding and colours for repeat project orders
Marine-grade materialsTested for high UV, humidity and coastal wind
FOB NingboL/C and T/T terms, quotation within one working day

Need Samples or Detailed Specifications?

Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.

Frequently Asked Questions

The questions buyers ask most often about this model. Tap a question to read the answer.

What are the main specifications?

This model is specified as Brand Foris Hortus; Fabric HDPE. All dimensions and finishes can be adjusted for the project, and the full size range is available on request.

What sizes and weights are available?

Resin, concrete, steel-plated and water-filled bases are produced, and the size is matched to the pole diameter and the canopy it carries.

How is it installed?

Bases are supplied as a separate item so the weight can be matched to the surface and to local wind exposure. Fixing method, anchoring and drainage are confirmed with the project specification.

What is the packaging and warranty?

Bases are shipped as a separate consignment from the umbrella frame and canopy. Outdoor furniture carries a 12-month warranty from the date of loading, with third-party inspection supported before shipment.

Configuration Level

Four Specification Tiers, One Build Standard

Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.

Level AEssential

Volume orders and straightforward commercial layouts.

Standard aluminium frame, standard canopy fabric, fixed position.

Level BStandardYour specification

The usual specification for hotel and restaurant terraces.

Upgraded frame section and fabric weight, added adjustment or opening system.

Level CPremium

Flagship hospitality projects where the terrace is photographed.

Marine-grade hardware, higher-specification fabric, LED or rotation as standard.

Level DProject

Multi-scheme developments specified to a full site brief.

Bespoke dimensions, matched base and furniture, project documentation and QC.

Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.

Review
  • 加载中···
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Elevate Garden Living

Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.