Iron In-Ground Umbrella Base | Rustproof, Waterproof, Durable | 13mm Thickness, Heavy-Duty Stability






Iron In-Ground Umbrella Base, Rustproof and Watertight
A cast iron ground anchor for permanent installations. Set into the ground and bedded in concrete, it gives a pole the highest stability of any base type with no visible weight to trip over.
- Cast iron, rustproof and waterproof
- Flush in-ground installation
- No visible base on the terrace
- Suited to permanent commercial installations
Six reasons specifiers choose in-ground
When the umbrella stays in one place for a season, an in-ground anchor removes every compromise that a weighted block brings.
In-Ground Stability
Bedded into concrete, the anchor resists tipping far better than any surface weight, which matters most in open and exposed positions.
Rustproof Cast Iron
The cast iron body is protected against corrosion, so it stays solid through seasons of rain, irrigation and coastal spray.
Waterproof Construction
The socket is sealed against water ingress, so the pole sleeve does not fill with water and freeze over winter.
Flush, Invisible Profile
Once set, almost nothing shows above the surface, leaving the terrace completely free of a trip hazard.
Permanent Fixing
A cast-in sleeve takes the pole out of service only by decision, so the umbrella cannot be moved by accident in a public space.
Commercial Specification
Written into hotel and resort project specs because it removes the base from the guest-facing floor plan entirely.

Set Once, Serviced Rarely
Installation is the whole point of an in-ground anchor. The sleeve is set into a prepared hole, bedded with concrete and levelled to the finished surface, after which the pole simply drops in.
- Cast-in sleeve set and bedded with concrete
- Pole drops in and locks without tools
- Flush with the finished terrace surface
- Suited to timber deck, paving and lawn installations

Where It Gets Used
In-ground anchors are specified where a parasol stays put: permanent terrace installations, resort pool decks, hotel courtyards and public spaces where furniture is not moved between seasons.
- Permanent hotel and resort terrace installations
- Resort pool decks and poolside dining
- Hotel courtyards and public plazas
- Restaurant garden terraces with fixed layouts
Technical Specifications
A straightforward specification for a permanent ground fixing.
| Product Type | Iron In-Ground Umbrella Base |
|---|---|
| Material | Cast iron with anti-corrosion coating |
| Colour | Black |
| Installation | Set into concrete in a prepared ground hole |
| Profile | Flush with the finished surface, no visible weight |
| Stability | Highest of any base type, fixed below ground |
| Weather Resistance | Rustproof and waterproof, suitable for year-round outdoor use |
| Application | Permanent hotel, resort and restaurant terrace installations |
| Specification Level | Level A · Essential |
| Customization | Socket diameter and finish available on project orders |
A Reliable Partner for Outdoor Hospitality
Foris Hortus supplies bases, umbrellas and outdoor furniture to hotels, resorts and F&B groups as one coordinated order.
Matched Hardware
Base and pole engineered to be specified together, so the socket fit is right the first time.
Brand Customization
Colour and finish options let the base match your property identity rather than sit against it.
Project Shipping
Consolidated packing and documented QC for cross-border hotel and resort orders.
After-Sales Support
Spare parts, care guidance and installation support for every commercial order.
Common Questions About This In-Ground Umbrella Base
How is an in-ground base installed?
A hole is prepared in the deck or paving, the cast-in sleeve is set and bedded with concrete, then the sleeve is levelled flush with the finished surface before the pole is fitted.
Can the umbrella still be removed?
Yes, the pole lifts out of the sleeve for maintenance or storage, but the anchor itself stays permanently in place, which is what makes it more stable than any weighted base.
Will it rust in coastal or poolside conditions?
No. The cast iron body is coated against corrosion and rated for year-round outdoor use, including salt air and poolside chlorine exposure.
Does water collect in the socket?
The socket is sealed against water ingress, so the pole sleeve does not fill with rainwater and freeze over winter.
What surface preparation is needed?
Timber decking is usually framed with a reinforced pocket, paving needs a concrete-encased set, and lawns are excavated and backfilled with concrete. We advise on the detail for your surface.
Is it suitable for public spaces?
Yes. Because the umbrella cannot be moved by accident, in-ground anchors are specified for public terraces where furniture security and public safety both matter.
Get a Quote for This In-Ground Umbrella Base
Tell us your quantity, umbrella size and destination port. We will reply with a tailored quotation within one business day.
At a glance
Features
Weighted stability
A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds.
Marine-grade finish
Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity.
Drainage and service access
Fill caps and drain points let a base be topped up or emptied between seasons without tools.
Matched to the frame
Weight, footprint and fixing method are confirmed against the canopy size and the local surface.
Options & customisation
- Resin, concrete, steel-plated and water-filled options
- In-ground anchoring for permanent terrace installation
- Matching cover and spare fill caps
- Base sizes matched to 38 mm, 48 mm and 80 mm poles
- OEM colour matching for branded terraces
Need Samples or Detailed Specifications?
Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.
Frequently Asked Questions
The questions buyers ask most often about this model. Tap a question to read the answer.
What are the main specifications?
This model is specified as Brand Foris Hortus; Fabric Iron. All dimensions and finishes can be adjusted for the project, and the full size range is available on request.
What sizes and weights are available?
Resin, concrete, steel-plated and water-filled bases are produced, and the size is matched to the pole diameter and the canopy it carries.
How is it installed?
Bases are supplied as a separate item so the weight can be matched to the surface and to local wind exposure. Fixing method, anchoring and drainage are confirmed with the project specification.
What is the packaging and warranty?
Bases are shipped as a separate consignment from the umbrella frame and canopy. Outdoor furniture carries a 12-month warranty from the date of loading, with third-party inspection supported before shipment.
Four Specification Tiers, One Build Standard
Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme.
Volume orders and straightforward commercial layouts.
Standard aluminium frame, standard canopy fabric, fixed position.
The usual specification for hotel and restaurant terraces.
Upgraded frame section and fabric weight, added adjustment or opening system.
Flagship hospitality projects where the terrace is photographed.
Marine-grade hardware, higher-specification fabric, LED or rotation as standard.
Multi-scheme developments specified to a full site brief.
Bespoke dimensions, matched base and furniture, project documentation and QC.
Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.
- 加载中···
- Phone
- *Title
- *Content
- Phone
- *Title
- *Content


















