5-Piece Round Outdoor Dining Set | 120cm Sunburst Slat Top Table with Four Rope Weave Armchairs for Garden Terrace Hotel
| Share | |
|---|---|
| Categories | Outdoor Sofa Set (Legacy) |
| Brand | Foris Hortus |
| Product Specifications | FHCH047 x4 + FHTB077 |
| Set contents | 1 table + 4 armchairs |
| Table diameter | 120 cm round |
| Table height | 75 cm |
| Table top | Radial wood-look slats, solid ivory centre insert |
| Table base | White aluminium column on cross base |
| Chair frame | Matt white round-tube aluminium |
| Chair armrests | Solid teak boards |
| Chair back | Hand-woven rope panel |
| Cushions | Grey fabric loose seat cushions, piped |
| Packing | Knock-down, two chairs per carton |
| FOB port | Ningbo |
| Terms of Payment | L/C, D/A, D/P, Western Union |
One table, four chairs, one order
A five-piece outdoor dining set: a 120 cm round table with a top of about thirty-two radial slats in pale wheat-coloured wood around a solid ivory centre insert, and four armchairs on matt white round-tube aluminium frames with tall rope-woven backs, sloping arms finished in solid teak and thick grey loose cushions.
The two pieces are made in the same workshop, to the same finish standard, so the whites match and the timber tones sit together. The set is quoted and delivered as one order, which is what a terrace plan, a villa courtyard or a small hotel dining garden usually needs: one conversation instead of two, one carton count, one delivery.
The set in use
Four covers at a 120 cm round top, with clear circulation around the table and chairs that can be lifted to where the light is.
Why the two pieces sit together
The set works because the details were decided once, for both pieces, in the same workshop.
One white, one timber tone
The table edge band, the chair frames and the table column are powder coated in the same matt white, and the chair armrest boards share the pale wheat tone of the table slats.
Grey cushions across the set
Four loose seat cushions in the same grey fabric-faced foam, piped along the edges, so the set reads as one grouping rather than a table with borrowed chairs.
Everything travels flat
The table ships knock-down with the top and base separated, and the chairs pack two to a carton, so the whole set fits a small footprints worth of cartons.
One factory, one finish standard
Tops, frames and rope work are all produced and finished in the same workshop, which is why replacement pieces can be ordered later in the same finish.
Dimensions and how the set is placed
Numbers a terrace plan can be drawn from.
| Table diameter | 120 cm round |
|---|---|
| Table height | 75 cm |
| Table top | About thirty-two radial wood-look slats with a solid ivory centre insert and a white edge band |
| Table base | Central white column on a cross base |
| Chair seat height | Standard outdoor dining height with a thick loose cushion |
| Chair frame | Matt white round-tube aluminium, sloping arms with solid teak boards |
| Chair back | Tall see-through panel of thin vertically woven rope |
| Cushions | Grey fabric-faced loose seat cushions, piped, with removable covers |
| Seating | Four covers per table |
| Packing | Knock-down: table top and base separated, two chairs per carton |
Allow about 80 cm of table edge per cover, and keep 60 cm behind each chair for the pull-back: a 120 cm top serves four covers comfortably on a footprint of roughly three by three metres.
Where the set is specified
One order, four settings.
Villa courtyards
A round top keeps the route through a courtyard open where a rectangular table would block it.
Hotel terraces
Sets ordered per terrace, with cushions specified once across the whole site.
Garden restaurants
Identical sets repeated across a garden, so the layout reads as one design.
Residential terraces
A complete setting in one delivery: table, chairs and cushions, packed flat.
Care
The same four habits apply to both pieces of the set.
Top
Rinse the slatted top with mild soap and water; the gaps drain, so it does not need much else.
Rope and cushions
Brush the rope back along the strands, and bring cushions in during long wet spells.
Frames
Wipe the white aluminium dry after rain and check the feet for grit before moving pieces.
Off-season
Stack the chairs, slope or cover the top if the terrace stays exposed through winter.
Questions buyers ask
Can the set be ordered with more chairs?
Yes. The 120 cm top is comfortable at four covers, and a larger version of the table in the same sunburst style takes six. Quote the seating number you need and the set is priced to match.
Do the chair and table whites match?
They are powder coated in the same workshop from the same colour batch, so the frames, the table column and the edge band read as one white.
Can finishes be changed for a project?
Yes. Frame colour, timber tone and cushion fabric can all be specified for volume orders, which is how hotel and restaurant projects usually order.
How is the set packed?
Knock-down: the table top and base travel in separate cartons and the chairs pack two to a carton, so the full set fits a small carton count for flat transport.
Ordering the set
The set is quoted as one order, per set, against the delivered quantity and destination port.
| Quotation | On request - send the quantity and destination port, and the reply comes within one working day |
|---|---|
| Customisation | OEM and ODM: frame colour, timber tone, cushion fabric and logo for volume orders |
| Packing | Knock-down, flat cartons, carton plan confirmed with the quotation |
| Container loading | Confirmed with the quotation against the order quantity |
| Lead time | Confirmed with the order confirmation |
- 加载中···
- Phone
- *Title
- *Content
Elevate Garden Living
- Phone
- *Title
- *Content