FHSF114 Aluminum Outdoor Sofa Set, 4-Piece Patio Set with Wood Armrests and Slatted Table for Garden and Courtyard

Aluminum outdoor sofa set with solid wood armrest caps

FHSF114 is a four-piece garden group: one wider sofa at 136 cm, two single-seaters at 78 cm and a 100 cm slatted coffee table. The frame is powder-coated aluminum, and every seating piece carries the same two details - a solid wood cap along the top of each arm, and a side panel closed with vertical bars instead of a solid plate.

Cushions are 11 cm thick in 200-230 g staple fibre outdoor fabric over a 24D sponge core, with a 10 cm back cushion filled with 500 g flat cotton. They are loose, so a stained cover can be swapped or a tired pad replaced on its own rather than reordering the set.

The set belongs to the same range of aluminum outdoor sofa sets the factory already builds, which is why single pieces and spare cushions can be reordered later against the same frame colour.

The four pieces

One configuration, four pieces. Component sizes are listed below and can be adapted to a layout on request.

Dimensions

All three elevations are drawn to the same 1:16 scale, so the sofa can be compared against a single-seater and the coffee table before a layout is signed off.

Cushions and comfort

The seat is built in two layers: an 11 cm pad over a 24D sponge core, with a separate 10 cm back cushion filled with 500 g flat cotton. Splitting the two means the back can be plumped independently of the seat.

Why the two cushions are built separately

• The 24D sponge seat pad holds height under daily use instead of flattening after a season
• The 500 g flat cotton back gives a softer, more compressible feel than the seat
• Both are loose, so either can be turned, aired or replaced on its own
• 200-230 g staple fibre covers drain and dry, which suits a garden setting

What can be changed

• Outdoor fabric grade and colour, made to order against a reference
• Cushion filling density, for a firmer or softer seat
• Frame colour beyond the white and dark grey production finishes

Frame and finish

What is on the outside

• Powder-coated aluminum frame, white or dark grey, all four pieces from the same batch
• Solid wood armrest caps carried across the sofa and both single-seaters
• Vertical bar side panels, which keep the outline light instead of reading as a solid box
• Slatted coffee table top at 42 cm, so it sits under the sightline of the seating

Why the arm and the side panel matter

Most low-cost garden sofas close the side with a flat aluminium plate. Here the side is left open with vertical bars and the arm is finished with a real wood cap, which is the detail a client notices first at close range - and it is also the part that is cheapest to repair if it is ever damaged in service.

Specifications

Model	FHSF114
Set composition	2 single-seaters, 1 sofa (136 cm), 1 coffee table
Single-seater	W78 x D74 x H74 cm
Sofa	W136 x D74 x H74 cm
Coffee table	W100 x D58 x H42 cm
Frame	Powder-coated aluminum, white or dark grey
Arm	Solid wood armrest cap, vertical bar side panel
Seat cushion	200-230 g staple fibre fabric, 11 cm thick, 24D sponge core
Back cushion	10 cm thick, 500 g flat cotton filling
Table top	Slatted top, 42 cm high
Net / gross weight	39 / 43 kg per set
Packing	145 x 85 x 53 cm per set
Container load	104 sets per 40HQ
Ready stock	4-piece set in khaki and beige

Where it is specified

Packing and container load

Cartons per set	1 carton, 145 x 85 x 53 cm per set
Net / gross weight	39 kg net and 43 kg gross per set
Container load	104 sets per 40HQ
Mixed loads	Individual pieces, spare cushions and spare table tops can be added to a container order
Sample orders	Single sets can be quoted for evaluation before a container is committed

Frequently asked questions

What is included in the set?

One sofa at 136 cm, two single-seaters at 78 cm and one slatted coffee table, so four pieces in total. Individual pieces can be ordered separately when a client is extending an existing group.

How thick are the cushions?

The seat pad is 11 cm in 200-230 g staple fibre fabric over a 24D sponge core, and the back cushion is 10 cm filled with 500 g flat cotton. Both are loose, so they can be turned, aired or replaced independently.

Is the armrest real wood?

The arm is closed with a solid wood cap, which is the detail that separates this set from a plain aluminium frame and the part that is easiest to repair in service.

What is the packing and container load?

One carton per set at 145 x 85 x 53 cm, 39 kg net and 43 kg gross. A 40HQ takes 104 sets.

Can the set be built in another colour or fabric?

Yes. White and dark grey are the production finishes, and any further frame colour, fabric grade or cushion filling is made to order against a reference supplied by the client.