FHSF207 Aluminum Outdoor Sofa Set, 5-Piece Patio Set with Teak Armrests and Bench for Terrace, Hotel and Poolside

Khaki aluminum outdoor sofa set with teak armrests

FHSF207 is a five-piece outdoor lounge set built on a box-section aluminum frame finished in khaki, made up of two single-seaters, one three-seater, one slat-top coffee table and one footstool bench. Every piece carries the same squared side frame, so the arms, legs and rails read as one continuous outline instead of a collection of joints.

Armrests are capped in solid teak and left unfinished, so the timber weathers to a pale silver-grey against the khaki frame. The set belongs to the wider range of aluminum outdoor sofa sets built by the same factory, which is why loose cushions and single pieces can be reordered later and still match.

Cushions are covered in a 360 g short-fibre outdoor fabric over a 24D sponge core: a 13 cm seat pad and a 12 cm back cushion on the seater pieces, both cut as separate loose cushions so they can be turned, aired and replaced without touching the frame.

The five pieces

The set ships as five pieces in one configuration. Component sizes are listed below and can be adjusted to a layout on request.

Dimensions

All four elevations are drawn to the same 1:16 scale, so the pieces can be compared directly against each other before a layout is fixed.

Cushion specification

Four layers decide how the set feels and how long it lasts outdoors. The short-fibre cover is the outdoor-facing layer; the sponge core sets the seat height.

Why the thickness matters

A 13 cm seat pad sits higher than a standard 10 cm pad, which keeps knees above hip level on a low-slung frame and makes the three-seater comfortable to get out of. The 12 cm back cushion is cut as its own loose block rather than sewn to the seat, so the two can be rotated independently when one side sits in the sun.

Frame and finish

What is on the outside

• Box-section aluminum frame with squared side panels, powder coated in khaki
• Solid teak armrest caps, matched across all five pieces
• Light wood slat coffee table top, replaceable if it is damaged in service
• Loose seat and back cushions, channel quilted, no fixed seams to the frame
• Adjustable feet to take up deck unevenness on roof and terrace floors

What can be changed

• Frame colour beyond the khaki finish, made to order against a reference
• Outdoor fabric grade and cushion filling
• Component sizes, when a layout needs a longer three-seater or a deeper table

Specifications

Model	FHSF207
Set composition	2 single-seaters, 1 three-seater, 1 coffee table, 1 footstool bench
Single-seater	W79 x D85 x H75 cm
Three-seater	W199 x D85 x H75 cm
Coffee table	W150 x D89 x H65 cm
Footstool bench	W140 x D40 x H40 cm
Frame	Box-section aluminum, squared side panels, khaki powder coat
Armrest	Solid teak cap
Cushions	360 g short-fibre outdoor fabric, 13 cm seat pad, 12 cm back cushion, 24D sponge core
Table top	Light wood slat
Net / gross weight	74 / 84 kg per set
Packing	194 x 70 x 66 cm and 153 x 12 x 93 cm per set
Container load	64 sets per 40HQ

Where it is specified

Packing and container load

Cartons per set	2 cartons: 194 x 70 x 66 cm and 153 x 12 x 93 cm
Net / gross weight	74 kg net and 84 kg gross per set
Container load	64 sets per 40HQ
Mixed loads	Individual pieces, spare cushions and spare slat tops can be added to a container order
Sample orders	Single sets can be quoted for evaluation before a container is committed

Frequently asked questions

What is included in the set?

Two single-seaters, one three-seater, one coffee table and one footstool bench, so five pieces in total. Individual pieces can be ordered separately when a client is extending an existing layout.

What are the cushions made of?

A 13 cm seat pad and a 12 cm back cushion in 360 g short-fibre outdoor fabric, both over a 24D sponge core, and both loose so they can be turned or replaced on their own.

How is the frame built?

A box-section aluminum frame with squared side panels, powder coated in khaki. The load runs through the side frame rather than a diagonal brace, which keeps the outline clean and leaves the deck under the seating clear for cleaning.

What is the packing and container load?

Two cartons per set, 194 x 70 x 66 cm and 153 x 12 x 93 cm, 74 kg net and 84 kg gross. A 40HQ takes 64 sets.

Can the set be built in another colour or fabric?

Yes. The khaki frame is the production finish, and any further frame colour, fabric grade or cushion filling is made to order against a reference supplied by the client.