FHSF207-D1 Box-Frame Aluminum Outdoor Sofa Set, 5-Piece Modular Patio Set with Teak Armrests and Bench

Box-frame aluminum outdoor sofa set with teak armrests

FHSF207-D1 is a five-piece outdoor lounge set built on a box-section aluminum frame. Each piece carries the same squared side frame, so the arms, legs and rails read as one continuous outline rather than a collection of joints. Armrests are capped in solid teak, and the coffee table takes a light wood slat top that lifts the whole set against a dark frame.

Cushions are 10 cm thick on a 25D sponge core, covered in 220 g Olefin, which is chosen for outdoor use because it resists fading and does not hold water. On the three-seater and the single-seaters the back cushions are loose and channel stitched, so they can be turned and replaced independently of the seat pads.

The set is produced in two frame colourways, and both are on this page: the dark frame in the two scene photographs, and the light frame in the studio views of the individual pieces. Any further colour is made to order against a reference.

Dimensions

All four drawings are to the same scale, so the pieces can be compared directly. The set ships with two single-seaters.

Typical arrangement

Plan view of the five-piece arrangement: the three-seater facing the two single-seaters across the coffee table, with the bench closing the group. Drawn to the same scale as the elevations above.

Construction and materials

Cushion build

Frame and finish

• Box-section aluminum frame with squared side panels
• Solid teak armrest caps, matched across the set
• Light wood slat coffee table top
• Loose channel-stitched back cushions on the seats
• Two frame colourways in production, dark and light, both photographed on this page
• Further colours and fabrics made to order against a reference

Specifications

Model	FHSF207-D1
Set composition	2 single-seaters, 1 three-seater, 1 coffee table, 1 bench
Single-seater	W85 x D79 x H76 cm
Three-seater	W199 x D85 x H76 cm
Coffee table	W150 x D89.5 x H65 cm
Bench	W140 x D40 x H38 cm
Frame	Box-section aluminum, squared side panels
Cushions	10 cm seat pad, 220 g Olefin cover, 25D sponge core
Table top	Light wood slat
Net / gross weight	63 / 68 kg per set
Packing	2 cartons per set, 0.842 cbm in total
Container load	76 sets per 40HQ

Where it is specified

Ordering

Set configuration	Five pieces as listed, or split into individual pieces for a larger layout
Colour	Two colourways in production, dark and light; further colours made to order against a reference
Fabric and filling	Outdoor fabric and cushion filling made to order
Sizes	Component sizes adjusted to a layout on request
Packing	2 cartons per set, 0.842 cbm in total, 63 kg net and 68 kg gross; 76 sets per 40HQ
Quotation	Confirmed against the drawing, the colour reference and the delivery window

Frequently asked questions

What is included in the set?

Two single-seaters, one three-seater, one coffee table and one bench. Individual pieces can be ordered separately when a client is extending a layout.

What are the cushions made of?

A 10 cm seat pad on a 25D sponge core, covered in 220 g Olefin, with loose channel-stitched back cushions on the seats.

How is the frame built?

A box-section aluminum frame with squared side panels. The load runs through the side frame rather than a diagonal brace, so the outline stays clean and the underside is easy to clean under.

What is the packing and container load?

Two cartons per set, 0.842 cbm in total, 63 kg net and 68 kg gross. A 40HQ takes 76 sets.

Can the set be extended later?

Yes. Every piece shares the same box-section frame and teak armrest cap, so single-seaters or a bench can be added later and match the original set.